LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 348 (Steering System) >> Tilt Steering Column >> Installation >> Step 16 - Center Spiral Cable

Step 16 - Center Spiral Cable

WARNING: This page is about a different car, the 2002 Toyota Prius and 2001 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the front wheels are facing straight ahead.
  2. NOTE: The cable will rotate about 2.5 turns to either left or right of the center.
  3. Turn the cable counterclockwise by hand until it becomes harder to turn.
  4. Then rotate the cable clockwise about 2.5 turns to align the marks.
    Fig 1: Locating Spiral Cable To Steering Column Alignment Marks
    G01066405Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002