LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Hybrid Vehicle Control System - Diagnostics) >> Pre-Check >> Step 4 - Fail-safe Chart

Step 4 - Fail-safe Chart

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

If any fail-safe Chart codes are recorded, the HV ECU enters fail safe mode.

Fig 1: Identifying DTCs Causing Fail Safe Mode (1 Of 6)
G01112829Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Identifying DTCs Causing Fail Safe Mode (2 Of 6)
G01112830Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Identifying DTCs Causing Fail Safe Mode (3 Of 6)
G01112831Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 4: Identifying DTCs Causing Fail Safe Mode (4 Of 6)
G01112832Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 5: Identifying DTCs Causing Fail Safe Mode (5 Of 6)
G01112833Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 6: Identifying DTCs Causing Fail Safe Mode (6 Of 6)
G01112834Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002