LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Hybrid Vehicle Control System - Diagnostics) >> Circuit Inspection >> DTC P3125: Converter & Inverter Assembly Malfunction >> Circuit Description - DTC P3125 - Information Codes 342, 343 >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for open, short and +B short in wire harness between HV ECU GSDN terminal and converter & inverter assembly G-SDOWN terminals  . See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION .
    NOTE: Confirm that there is no open circuit in the wire harness. The generator gate shutdown signal circuit has +B short if the battery voltage is always applied to the HV ECU GSDN terminal with the ignition ON.
    1. NG:  Repair or replace wire harness.
    2. OK:  Replace converter & inverter assembly.
scientia non olet · About LEMON Manuals