Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

Check continuity of wire harness between HV ECU and converter & inverter assembly . See HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION .
OK: Continuity: Less than 1 Ω

Fig 1: Identifying Information Code 326-341 Resistance Specifications
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. NG: Repair or replace wire harness.
2. OK: Replace converter & inverter assembly.