LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 336 (Hybrid Vehicle Control System - Diagnostics) >> Circuit Inspection >> DTC P3004: Power Cable Malfunction >> DTC P3004 - Information Code 131 >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
  1. Is DTC of battery ECU being output? 
    1. YES  : Check the applicable DTC.
    2. NO: Go to   2 . 
  2. Check condition of service plug terminal (loosened, poor contact, etc.). 
    1. NG:  Replace service plug.
    2. OK: Go to   3 . 
  3. Check continuity of power cable. 

    OK:  Continuity : Less than 1 Ω.

    1. NG:  Replace the power cable.
    2. OK:  Replace the system main relay.