LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Steering System) >> Tilt Steering Column >> Removal >> Step 14 - Remove Intermediate Shaft Sub-Assembly And No. 2 Column Hole Cover Sub-Assembly

Step 14 - Remove Intermediate Shaft Sub-Assembly And No. 2 Column Hole Cover Sub-Assembly

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt A and remove the intermediate shaft sub-assembly.
  2. Remove the No. 2 column hole cover sub-assembly.
scientia non olet · About LEMON Manuals