LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 335 (Steering System) >> Power Steering Vane Pump >> Removal >> Step 5 - Remove PS Vane Pump Assembly With Pressure Feed Tube

Step 5 - Remove PS Vane Pump Assembly With Pressure Feed Tube

WARNING: This page is about a different car, the 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connector from the oil pressure switch.
    2. NOTE: Bolt A cannot be removed.
  2. Loosen the bolt A sufficiently so that pump assembly can be removed.
  3. Remove the bolt B and PS vane pump assembly.
scientia non olet · About LEMON Manuals