LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 328 (Interior Light System) >> Interior Light System >> Inspection >> Step 3 - Inspect Door Courtesy Switch Continuity

Step 3 - Inspect Door Courtesy Switch Continuity

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that continuity exists between terminals and the switch body with the switch ON (switch pin released: opened door).
    Fig 1: Testing Door Courtesy Switch
    G01897755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Check that no continuity exists between terminals and the switch body with the switch OFF (switch pin pushed in: closed door).

    If operation is not as specified, replace the switch.

scientia non olet · About LEMON Manuals