LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Combination Meter) >> Combination Meter >> Inspection >> Step 6 - Inspect Volt Gauge System

Step 6 - Inspect Volt Gauge System

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between terminals A and B.

Fig 1: Locating Volt Gauge Terminals
G01897798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. Resistance  : approximately 347 Ohms.

If resistance value is not as specified, replace the gauge.