LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Combination Meter) >> Combination Meter >> Inspection >> Step 5 - Inspect Tachometer Resistance

Step 5 - Inspect Tachometer Resistance

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between terminals with fixing pointer to the stopper.

Fig 1: Locating Tachometer Terminals
G01897797Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Tachometer Terminal Specifications
G01897796Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If resistance value is not as specified, replace the meter.