Step 3 - Inspect Speedometer Resistance

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.

Measure the resistance between terminals while fixing pointer to the stopper.

If resistance value is not as specified, replace the meter.

Fig 1: Locating Speedometer Terminals (W/Tachometer)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Locating Speedometer Terminals (W/O Tachometer)

Fig 3: Speedometer Terminal Specifications