LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Combination Meter) >> Combination Meter >> Inspection >> Step 29 - Inspect Open Door Warning Light

Step 29 - Inspect Open Door Warning Light

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the connector from the door courtesy switch and ground terminal on the wire harness side connector.
    Fig 1: Testing Open Door Warning Light
    G01897833Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. Turn the ignition switch ON, check that the warning light lights up.

If the warning light does not light up, test the bulb.