LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 325 (Combination Meter) >> Combination Meter >> Inspection >> Step 26 - 2UZ-FE: Inspect "4Lo/4Hi", 4WD" Indicator Light

Step 26 - 2UZ-FE: Inspect "4Lo/4Hi", 4WD" Indicator Light

WARNING: This page is about a different car, the 2002 Toyota Tundra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center cluster finish panel.
  2. Disconnect the connectors from the center cluster integration.
  3. "4Lo" indicator: Ground terminal 3 on the wire harness side connector.
    Fig 1: Testing "4Lo/4Hi", 4WD" Indicator Light (4.7L)
    G01897830Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. "4Hi" indicator: Ground terminal 2 on the wire harness side connector.
scientia non olet · About LEMON Manuals