Torque Specifications: Sequoia
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (SEQUOIA)
| Application | Ft. Lbs. (N.m) |
|---|---|
| ECT Sensor | 15 (20) |
| Front Fuel Pipe-To-Fuel Rail Union Bolt | 29 (39) |
| Fuel Pulsation Damper | 29 (39) |
| Fuel Rail-To-Intake Manifold Nut | 13 (18) |
| Fuel Tank Strap Bolt | 45 (61) |
| Heated Oxygen Sensor-To-Exhaust Manifold | 32 (43) |
| Heated Oxygen Sensor-To-Exhaust Pipe Retaining Nut | 15 (20) |
| Intake Manifold Bolt/Nut | 13 (18) |
| Knock Sensor | 33 (45) |
| Oil Cooler Line-To-Transmission Nut | 25 (34) |
| Throttle Body Bolt/Nut | 13 (18) |
| Vehicle Speed Sensor Retaining Bolt | 12 (16) |
| INCH Lbs. (N.m) | |
| Accelerator Pedal Position Sensor Retaining Screw | 48 (5.4) |
| Camshaft Position Sensor Bolt & Stud Bolt | 66 (7.5) |
| Crankshaft Position Sensor Bolt | 58 (6.6) |
| Driver's Side Upper Timing Belt Cover Bolt/Nut | 66 (7.5) |
| Front Fuel Pipe Clamp Bolt | 66 (7.5) |
| Fuel Pressure Regulator Bolt | 66 (7.5) |
| Fuel Pump Mounting Bracket-To-Fuel Tank Bolt | 31 (3.5) |
| Fuel Return Pipe-To-Fuel Rail Clamp Bolt | 66 (7.5) |
| Ignition Coil Bolt | 66 (7.5) |
| PNP Switch Retaining Bolt | 115 (13.0) |
| PNP Switch Retaining Nut | 35 (4.0) |
| Throttle Control Motor Cover-To-Throttle Body Retaining Screw | 30 (3.4) |
| Throttle Control Motor-To-Throttle Control Motor Cover Screw | 30 (3.4) |
| TP Sensor Retaining Screw | 18 (2.0) |