Torque Specifications: CAMRY
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (CAMRY)
| Application |
Ft. Lbs. (N.m) |
| A/F Sensor |
|
| Air Intake Chamber Bolt/Nut |
32 (43) |
| Air Intake Chamber Support Brace Bolt |
15 (20) |
| Coolant Housing Bolt/Nut |
11 (15) |
| ECT Sensor |
|
| EGR Gas Temperature Sensor |
15 (20) |
| Engine Hanger Bolt |
29 (39) |
| Fuel Pulsation Damper |
24 (33) |
| Heated Oxygen Sensor |
32 (43) |
| Intake Air Control Valve Nut |
11 (15) |
| Intake Manifold Bolt/Nut |
11 (15) |
| Knock Sensor |
29 (39) |
| No. 1 Fuel Pipe-To-Fuel Rail Bolt |
24 (33) |
| No. 1 Fuel Pipe-To-Intake Manifold Clamp Bolt |
15 (20) |
| Power Steering Pressure Switch |
15 (20) |
| Suspension Upper Brace Nut |
59 (80) |
| Throttle Body Bolt/Nut |
14 (19) |
| INCH Lbs. (N.m) |
| Camshaft Position Sensor Bolt |
71 (8.0) |
| Control Lever Nut |
112 (12.7) |
| Crankshaft Position Sensor Bolt |
71 (8.0) |
| EGR Pipe Nut |
106 (12.0) |
| EGR Position Sensor-To-EGR Valve Nut |
|
| EGR Valve Retaining Nut |
106 (12.0) |
| Fuel Pump Retaining Plate-To-Fuel Tank Bolt |
31 (3.5) |
| Fuel Rail-To-Intake Manifold Bolt |
89 (10.1) |
| Ignition Coil Bolt |
71 (8.0) |
| PNP Switch Retaining Bolt |
48 (5.4) |
| PNP Switch Retaining Nut |
61 (6.9) |
| TP Sensor Retaining Screw |
18 (2.0) |