Removal (4Runner)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Drain cooling system. Remove air cleaner hose located between air cleaner and throttle body.
- Disconnect control cable, air hoses, coolant hoses and electrical connectors at throttle body. Remove bolts/nuts, throttle body and gasket. Manufacturer does not list servicing procedure for accelerator pedal position sensor, throttle control motor and Throttle Position (TP) sensor. If any of these components are defective, throttle body must be replace as a complete assembly.