Removal & Installation (Land Cruiser)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel pump switch is located on driver's side of instrument panel. See Fig 1. Fuel pump switch contains a reset switch which has an OFF and ON position. See Fig 1.
- Remove carpet and disconnect electrical connector at fuel pump switch. Remove bolts and fuel pump switch. To install, reverse removal procedure. Ensure reset switch is in ON position for fuel pump operation.