Removal & Installation (Sienna)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel pressure regulator is located on fuel pump assembly in the fuel tank. See Figure. Remove fuel pump from fuel tank. See FUEL PUMP .
- Using small screwdriver, pry No. 2 fuel suction support from bottom of fuel pump. Remove rubber cushion. Remove fuel pressure regulator with "O" ring from bottom of main fuel filter.
- To install, reverse removal procedure using NEW "O" ring on fuel pressure regulator. Coat "O" ring with gasoline before installing fuel pressure regulator. Reinstall fuel pump.