LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Removal, Overhaul & Installation V6 & V8) >> Fuel Systems >> Fuel Pressure Regulator >> Removal & Installation (Avalon & Camry Solara)

Removal & Installation (Avalon & Camry Solara)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fuel pressure regulator is located on fuel pump assembly in the fuel tank. See Fig 1. Remove fuel pump from fuel tank. See FUEL PUMP .
  2. Remove retaining screw and round fuel filter with "O" ring. See Fig 1. Remove fuel pressure regulator retaining screw. Remove fuel pressure regulator with "O" ring from fuel pump mounting bracket.
  3. To install, reverse removal procedure using NEW "O" rings. Coat "O" rings with gasoline before installing fuel pressure regulator and round fuel filter. Tighten fuel pressure regulator and round fuel filter retaining screws to specification. See TORQUE SPECIFICATIONS . Reinstall fuel pump.
    Fig 1: Locating Fuel Pressure Regulator (Avalon & Camry Solara)
    G00035221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002