Removal & Installation (All Models)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Ignition switch is located at bottom of upper steering column bracket. See Fig 1. If necessary to remove steering column for access to ignition switch, see appropriate STEERING COLUMNS article in STEERING. Remove screws and ignition switch. To install, reverse removal procedure.