Removal & Installation (Camry & Camry Solara)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect electrical connector at EGR position sensor. EGR position sensor is located on top of EGR valve. Remove EGR position sensor-to-EGR valve nuts. Remove EGR position sensor from EGR valve.
- To install, reverse removal procedure. Tighten EGR position sensor-to-EGR valve nuts to specification (if available). See TORQUE SPECIFICATIONS .