Removal & Installation (Camry & Camry Solara)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- EGR gas temperature sensor is screwed into bottom of pipe that EGR valve is mounted on. It may be necessary to remove throttle body for access to EGR gas temperature sensor. For removal of throttle body, See THROTTLE BODY under FUEL SYSTEMS. Disconnect electrical connector at EGR gas temperature sensor.
- Remove EGR gas temperature sensor. To install, reverse removal procedure. Tighten EGR gas temperature sensor to specification. See TORQUE SPECIFICATIONS .