Removal & Installation (All Models)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
For identifying vapor pressure location, see VAPOR PRESSURE SENSOR LOCATION table. Vapor pressure sensor servicing procedure is just primarily an unbolt and bolt-on procedure. On some models, it may be necessary to remove fuel tank for access to vapor pressure sensor.
VAPOR PRESSURE SENSOR LOCATION
| Application | Location | ||
|---|---|---|---|
| Avalon | On Charcoal Canister, Near Fuel Tank & Contains Black 3-Pin Electrical Connector With White, Pink & Blue/Red Wires | ||
| Camry | On Charcoal Canister, Near Fuel Tank & Contains Black 3-Pin Electrical Connector With Brown, Yellow & Pink Wires | ||
| Camry Solara | On Charcoal Canister, Near Fuel Tank & Contains Black 3-Pin Electrical Connector With Brown, Blue/Red & Yellow Wires | ||
| Highlander | (1) | ||
| Land Cruiser | On Rear Corner Of Charcoal Canister & Contains Black 3-Pin Electrical Connector With Brown/White, Blue/Red & Blue/Black Wires | ||
| Sequoia | On Top Of Fuel Pump Assembly On Top Of Fuel Tank & Contains Black 3-Pin Electrical Connector With Red/Green, Green/Black & Green/White Wires | ||
| Sienna | On Top Of Fuel Pump Assembly On Top Of Fuel Tank & Contains Black 3-Pin Electrical Connector With Brown, Yellow & Blue/Red Wires | ||
| Tacoma | On Top Of Fuel Pump Assembly On Top Of Fuel Tank & Contains Black 3-Pin Electrical Connector With Brown, Yellow & Blue/Red Wires | ||
| Tundra | On Rear Corner Of Charcoal Canister & Contains Black 3-Pin Electrical Connector With Green/White, Red/Green & Green/Black Wires | ||
| 4Runner | On Top Of Fuel Pump Assembly On Top Of Fuel Tank & Contains Black 3-Pin Electrical Connector With Green/Black, Yellow & Blue/Black Wires | ||
|
|||