Removal & Installation (Avalon, Camry, Camry Solara, Highlander, Sequoia, Sienna, Tacoma & 4Runner)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Pressure switching valve Vacuum Switching Valve (VSV) servicing procedure is just primarily an unbolt and bolt-on procedure. See PRESSURE SWITCHING VALVE VSV LOCATION table. For illustration of pressure switching valve VSV location, see EMISSION SYSTEMS & SUB-SYSTEMS in SYSTEM & COMPONENT TESTING - V6 & V8 article.
PRESSURE SWITCHING VALVE VSV LOCATION
| Application | Location |
|---|---|
| Avalon | On Bracket At Charcoal Canister Near Fuel Tank & Contains Blue 2-Pin Electrical Connector With Pink/Black & Black/White Wires |
| Camry | On Bracket At Charcoal Canister Near Fuel Tank & Contains Blue 2-Pin Electrical Connector With Violet & Black/Red Wires |
| Camry Solara | On Bracket At Charcoal Canister Near Fuel Tank & Contains Blue 2-Pin Electrical Connector With White/Red & Red Wires |
| Highlander | On Bracket At Charcoal Canister Behind Fuel Tank & Contains Blue 2-Pin Electrical Connector With Green/Yellow & White Wires |
| Sequoia | On Bracket At Charcoal Canister Near Fuel Tank & Contains Blue 2-Pin Electrical Connector With Pink/Blue & Green/Red Wires |
| Sienna | On Bracket At Charcoal Canister Near Fuel Tank & Contains Dark Gray 2-Pin Electrical Connector With Black/Red & White/Red Wires |
| Tacoma | On Bracket At Charcoal Canister Near Fuel Tank & Contains Blue 2-Pin Electrical Connector With Green/Black & White/Red Wires |
| 4Runner | On Bracket At Charcoal Canister Near Fuel Tank & Contains Blue 2-Pin Electrical Connector With Red/Yellow & White/Blue Wires |