LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Removal, Overhaul & Installation V6 & V8) >> Computerized Engine Controls >> Fuel Pump Electronic Control Unit >> Removal & Installation (Land Cruiser)

Removal & Installation (Land Cruiser)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fuel pump Electronic Control Unit (ECU) is located behind inner panel, just behind driver's side rear wheelwell. See Fig 1. Remove necessary door scuff plates and inner panel for access to fuel pump ECU. Disconnect electrical connector at fuel pump ECU. Remove bolts and fuel pump ECU. To install, reverse removal procedure.

Fig 1: Locating Fuel Pump Electronic Control Unit (Land Cruiser)
G98B01613Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002