LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Removal, Overhaul & Installation V6 & V8) >> Air Induction Systems >> Intake Air Control Valve >> Removal (Camry & Camry Solara)

Removal (Camry & Camry Solara)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect vacuum hose at actuator on intake air control valve located on end of air intake chamber. See Figure and Figure .
  2. Remove ground straps from intake air control valve. Remove remaining nuts for intake air control valve. Remove intake air control valve by prying between air intake chamber and intake air control valve. See Figure. Remove gasket.