LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Engine Controls - Removal, Overhaul & Installation V6 & V8) >> Air Induction Systems >> Acoustic Control Induction System Vacuum Switching Valve >> Removal & Installation (Camry & Camry Solara)

Removal & Installation (Camry & Camry Solara)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove "V" bank cover. See Fig 1 and Fig 2 . Acoustic Control Induction System (ACIS) Vacuum Switching Valve (VSV) is the front outside VSV on emission control valve set. See Fig 1 and Fig 2 .
  2. Disconnect electrical connectors and vacuum lines from vacuum switching valves on emission control valve set. Remove emission control valve set.
  3. Remove ACIS VSV from emission control valve set. To install, reverse removal procedure.
    Fig 1: Locating "V" Bank Cover & Various Vacuum Switching Valves (Camry)
    G00023075Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Fig 2: Locating "V" Bank Cover & Various Vacuum Switching Valves (Camry Solara)
    G00005748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002