Clock Loses Or Gains Time

WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.

Problem No. 2

NOTE: Inspect the connector on the wire harness side.

Fig 1: Locating B+ & Gnd Terminals

Check that the battery positive voltage is 10 - 16 V. If voltage is not as specified, replace the battery.
Check that the DOME fuse is not blown. If the fuse is blown, replace the fuse and check for short.
Troubleshoot the using clock troubleshooting flowchart. See Fig 2.

Fig 2: Troubleshooting Flowchart For Problem No. 2
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002