LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Controls - Removal & Installation, Overhaul 4 Cylinder) >> Torque Specifications >> Highlander

Torque Specifications: Highlander

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS (HIGHLANDER)

Application Ft. Lbs. (N.m)
A/F Sensor (1)
ECT Sensor 15 (20)
Fuel Rail-To-Cylinder Head Bolt 15 (20)
Heated Oxygen Sensor (1)
Intake Manifold Bolt/Nut 22 (30)
Knock Sensor 29 (39)
Power Steering Pressure Switch 15 (20)
Throttle Body Bolt 22 (30)
INCH Lbs. (N.m) 
Camshaft Position Sensor Bolt 80 (9.0)
Control Lever Nut 112 (12.7)
Crankshaft Position Sensor Bolt 80 (9.0)
Fuel Pump Retaining Plate-To-Fuel Tank Bolt (1)
Ignition Coil Bolt 80 (9.0)
PNP Switch Retaining Bolt 48 (5.4)
PNP Switch Retaining Nut 61 (6.9)
VVT Camshaft Timing Oil Control Valve Retaining Bolt 80 (9.0)
(1) Information is not available from manufacturer.