Removal & Installation (Prius)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Service procedure should only be performed by authorized dealer.

Camshaft position sensor is located on end of cylinder head at flywheel end of engine and contains a Black 2-pin electrical connector with Green and Red wires. Manufacturer states that converter and inverter assembly must be removed for access to camshaft position sensor. See CONVERTER AND INVERTER ASSEMBLY in HYBRID VEHICLE CONTROL SYSTEM article.