LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Controls - Removal & Installation, Overhaul 4 Cylinder) >> Ignition Systems >> Camshaft Position Sensor >> Removal & Installation (Camry & Highlander)

Removal & Installation (Camry & Highlander)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft position sensor is located on end of cylinder head at flywheel end of engine. See Figure. Service information is not available from manufacturer except for camshaft position sensor bolt torque specification. See TORQUE SPECIFICATIONS .