Removal (Highlander)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- Drain cooling system. Remove upper cap on air cleaner assembly with air cleaner hose. Disconnect control cable(s), coolant hoses, vacuum hose and electrical connectors at throttle body. Remove bolts, throttle body and gasket from intake manifold.
- Remove retaining screws, Idle Air Control (IAC) valve and gasket from bottom of throttle body (if necessary). Remove retaining screws and Throttle Position (TP sensor) from throttle body (if necessary).