Removal & Installation (Celica)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel pressure regulator is located on fuel pump assembly in the fuel tank. See Figure. Remove fuel pump from fuel tank. See FUEL PUMP .
- Using screwdriver, remove No. 1 fuel suction support from main fuel filter. See Figure. Use care not to damage No. 1 fuel suction support during removal. Disconnect lead wire from fuel pump and No. 1 fuel suction support. Remove fuel pressure regulator with "O" ring from main fuel filter.
- To install, reverse removal procedure using NEW "O" ring on fuel pressure regulator. Coat "O" ring with gasoline before installing fuel pressure regulator. Reinstall fuel pump.