LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Controls - Removal & Installation, Overhaul 4 Cylinder) >> Fuel Systems >> Fuel Pressure Regulator >> Installation

Fuel Pressure Regulator: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure using NEW "O" rings. Coat "O" ring with gasoline before installing fuel pressure regulator and round fuel filter. Tighten fuel pressure regulator retaining screw and round fuel filter retaining screw to specification. See TORQUE SPECIFICATIONS . Reinstall fuel pump.

Fig 1: Locating Fuel Pressure Regulator (Camry Solara)
G00035221Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002


  1. To install, reverse removal procedure using NEW "O" ring. Coat "O" ring with gasoline before installing fuel pressure regulator in fuel rail.
  2. Tighten fuel pressure regulator bolts to specification. See TORQUE SPECIFICATIONS . Operate fuel pump and check for fuel leaks. See FUEL PUMP OPERATION under FUEL SYSTEMS in BASIC DIAGNOSTIC PROCEDURES - 4-CYLINDER article.