LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Controls - Removal & Installation, Overhaul 4 Cylinder) >> Engine Sensors & Switches >> Vehicle Speed Sensor >> Installation

Vehicle Speed Sensor: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure using NEW "O" ring. Coat "O" ring with Dexron-III ATF (A/T models) or gear oil (M/T models) before installing on vehicle speed sensor. Tighten retaining bolt to specification. See TORQUE SPECIFICATIONS .

Fig 1: Locating Typical Vehicle Speed Sensor (Camry Solara, Celica, Corolla, ECHO & RAV4)
G98I11468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002


To install, reverse removal procedure using NEW "O" ring. Coat "O" ring with Dexron-III ATF (A/T models) or gear oil (M/T models) before installing on vehicle speed sensor. Tighten retaining bolt to specification. See TORQUE SPECIFICATIONS .

Fig 1: Locating Typical Vehicle Speed Sensor (Tacoma)
G98I12516Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002