LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Controls - Removal & Installation, Overhaul 4 Cylinder) >> Engine Sensors & Switches >> Engine Coolant Temperature Sensor >> Removal & Installation (Prius)

Removal & Installation (Prius)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Service procedure should only be performed by authorized dealer.

ECT sensor is located on flywheel end of cylinder head and contains a Dark Gray 2-pin electrical connector with White and Brown wires. Manufacturer states that converter and inverter assembly must be removed for access to ECT sensor. The converter and inverter assembly are involved with the high-voltage system used on this vehicle and service procedure should only be performed by authorized dealer.