Removal & Installation (Tacoma)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- Heated Air/Fuel (A/F) sensor is mounted on exhaust pipe in front of catalytic converter. Disconnect electrical connector for A/F sensor. Remove retaining nuts, A/F sensor and gasket from exhaust pipe.
- To install, reverse removal procedure using NEW gasket. Tighten A/F sensor retaining nuts to specification. See TORQUE SPECIFICATIONS .