Removal & Installation (Camry, Camry Solara, Highlander & RAV4)
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
- On Camry and Camry Solara, a heated Air/Fuel (A/F) sensor is mounted on exhaust manifold above catalytic converter. On Highlander and RAV4, there are 2 heated A/F sensors mounted on exhaust manifold above catalytic converter. On all models, disconnect electrical connector for A/F sensor. Remove heat insulator for access to A/F sensor. Unscrew A/F sensor from exhaust manifold.
- To install, reverse removal procedure. Tighten A/F sensor to specification (if available). See TORQUE SPECIFICATIONS .