LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Controls - Removal & Installation, Overhaul 4 Cylinder) >> Emission Systems & Sub-Systems >> Canister Closed Valve Vacuum Switching Valve >> Removal & Installation (ECHO)

Removal & Installation (ECHO)

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.

Canister Closed Valve Vacuum Switching Valve (CCV VSV) is located on charcoal canister. See Fig 1. Charcoal canister is located near fuel tank. Remove charcoal canister. Remove bracket for access to CCV VSV if necessary. See Fig 1. Remove screw and CCV VSV with "O" ring from charcoal canister. To install, reverse removal procedure using NEW "O" ring.

Fig 1: Locating Canister Closed Valve Vacuum Switching Valve (ECHO)
G99G54722Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002