LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Engine Controls - System & Component Testing - V6 & V8) >> Engine Sensors & Switches >> EGR Gas Temperature Sensor >> Camry & Camry Solara

Camry & Camry Solara

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove EGR gas temperature sensor. EGR gas temperature sensor is screwed into bottom of pipe that EGR valve is mounted on. It may be necessary to remove throttle body for access to EGR gas temperature sensor. If necessary to remove throttle body for access to EGR gas temperature sensor. See THROTTLE BODY under FUEL SYSTEMS in REMOVAL, OVERHAUL & INSTALLATION - V6 & V8 article.
  2. Place threaded end of EGR gas temperature sensor and thermometer in container of oil. Attach ohmmeter between electrical terminals on EGR gas temperature sensor.
  3. Heat oil and note resistance at specified temperature. See EGR GAS TEMPERATURE SENSOR RESISTANCE  table. Replace EGR gas temperature sensor if resistance is not within specification. Reinstall EGR gas temperature sensor.
    EGR GAS TEMPERATURE SENSOR RESISTANCE

    Application & Temperature Ohms
    Camry
    122°F (50°C) 69,400-88,500
    212°F (100°C) 11,890-14,370
    302°F (150°C) 2790-3590
    Camry Solara
    122°F (50°C) 64,000-97,000
    212°F (100°C) 11,000-16,000
    302°F (150°C) 2000-4000