Accelerator Pedal Position Sensor: Camry
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tundra, 2002 Toyota Tacoma, 2002 Toyota Sienna, 2002 Toyota Sequoia, and 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect electrical connector at accelerator pedal position sensor. Accelerator pedal position sensor is located near top of accelerator pedal and contains a Black 6-pin electrical connector.
- Note terminals on accelerator pedal position sensor. See Fig 1. Using ohmmeter, check that resistance is within specification between specified terminals on accelerator pedal position sensor. See ACCELERATOR PEDAL POSITION SENSOR RESISTANCE table. See Fig 1. Replace accelerator pedal position sensor if resistance is not within specification.ACCELERATOR PEDAL POSITION SENSOR RESISTANCE
Terminals Ohms VCP1 & EP1 2250-4750 VCP2 & EP2 2250-4750 VPA1 & EP2 5000 Or Less VPA2 & EP1 5000 Or Less