LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Control System & Component Testing - 4-Cylinder) >> Engine Sensors & Switches >> Park/Neutral Position Switch >> Camry, Camry Solara, Celica, Corolla, ECHO, Highlander, RAV4 & Tacoma

Camry, Camry Solara, Celica, Corolla, ECHO, Highlander, RAV4 & Tacoma

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Park/Neutral Position (PNP) switch is used only on A/T models.
  1. Disconnect electrical connector from Park/Neutral Position (PNP) switch. PNP switch is mounted on side of transmission/transaxle. Note terminal identification. See Fig 1-Fig 4 .
  2. Using ohmmeter, check for continuity between specified terminals with shift lever in proper positions. See PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS  table.
  3. If proper continuity does not exist, adjust or replace PNP switch as necessary. For adjustment or replacement of PNP switch, see PARK/NEUTRAL POSITION SWITCH under ENGINE SENSORS & SWITCHES in REMOVAL, OVERHAUL & INSTALLATION - 4-CYLINDER article.
PARK/NEUTRAL POSITION SWITCH SPECIFICATIONS

Application & Shift Lever Position Continuity Between Terminals No.
Camry
Park 1 & 3; 6 & 9
Reverse 2 & 3
Neutral 3 & 5; 6 & 9
Drive 3 & 7
2 3 & 4
Low 3 & 8
Camry Solara, Celica, Corolla, Highlander & RAV4
Park 1 & 3; 6 & 9
Reverse 2 & 3
Neutral 3 & 5; 6 & 9
Drive 3 & 7
2 3 & 4
Low 3 & 8
ECHO
Park 3 & 5; 6 & 9
Reverse 2 & 3
Neutral 1 & 3; 6 & 9
Drive 3 & 7
2 3 & 4
Low 3 & 8
Tacoma
With A44D Transmission
Park 4 & 7; 5 & 6
Reverse 4 & 8
Neutral 4 & 10; 5 & 6
Drive 4 & 9
2 2 & 4
Low 3 & 4
With A340E Or A340F Transmission
Park 1 & 3; 6 & 9
Reverse 2 & 3
Neutral 3 & 5; 6 & 9
Drive 3 & 7
2 3 & 4
Low 3 & 8
Fig 1: Identifying Park/Neutral Position Switch Terminals (Camry)
G00035216Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Identifying Park/Neutral Position Switch Terminals (Camry Solara, Celica With 1.8L 2ZZ-GE, Corolla, RAV4 & Tacoma With A340E Or A340F Transmission)
G99A08770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Identifying Park/Neutral Position Switch Terminals (Celica With 1.8L 1ZZ-FE, ECHO & Highlander)
G99J54428Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 4: Identifying Park/Neutral Position Switch Terminals (Tacoma With A44D Transmission)
G97G06255Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002