LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Control System & Component Testing - 4-Cylinder) >> Engine Sensors & Switches >> EGR Gas Temperature Sensor >> Tacoma 2.7L 3RZ-FE

Tacoma 2.7L 3RZ-FE

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Toyota Tacoma, 2002 Toyota RAV4, 2002 Toyota Prius, 2002 Toyota MR2, and 2002 Toyota Highlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. EGR gas temperature sensor is located near EGR valve. Remove EGR gas temperature sensor. See EGR GAS TEMPERATURE SENSOR under ENGINE SENSORS & SWITCHES in REMOVAL, OVERHAUL & INSTALLATION - 4-CYLINDER article.
  2. Place threaded end of EGR gas temperature sensor and thermometer in container of oil. Attach ohmmeter between electrical terminals on EGR gas temperature sensor.
  3. Heat oil and note resistance at specified temperature. See EGR GAS TEMPERATURE SENSOR RESISTANCE  table. Replace EGR gas temperature sensor if resistance is not within specification. Reinstall EGR gas temperature sensor.
EGR GAS TEMPERATURE SENSOR RESISTANCE

Temperature Ohms
122°F (50°C) 64,000-97,000
212°F (100°C) 11,000-16,000
302°F (150°C) 2000-4000