LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 267 (HVAC - Diagnostics) >> Diagnostic Tests >> Vehicle Speed Signal Circuit >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2002 Toyota Sequoia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check Operation Of Speedometer 

    Check: 

    Check that the tachometer operates normally.

    1. NG: Proceed to  COMBINATION METER 
    2. NG: Go to next step. 
  2. Check Harness And Connector Between Integration Control And Panel And Combination Meter 
    1. NG: Repair or replace harness or connector. 
    2. OK: Check and replace integration control and panel. 
scientia non olet · About LEMON Manuals