Belt Tension: V6

WARNING: This page is about a different car, the 2004 Lexus ES 330. However, it is still accessible from the selected car via links, so may be relevant.

Generator is used to adjust drive belt tension. For belt routing, see Fig 1. Check belt tension using Burroughs Tension Gauge (BT-33-73F) at longest belt run. See Fig 2. Adjust belt tension if necessary. See BELT TENSION SPECIFICATIONS table.

Fig 1: Belt Routing & Checking Belt Tension (ES330)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Identifying Belt Tension Gauge

BELT TENSION SPECIFICATIONS

Application	New Belt	Used Belt
V-Ribbed Belt
Generator	139-192 lbs.	66-110 lbs.
Power Steering	146-190 lbs.	73-117 lbs.