LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Suspension Rear) >> Removal & Installation >> Wheel Bearings (Hubs) >> Installation

Wheel Bearings (Hubs): Installation

WARNING: This page is about a different car, the 2004 Toyota Avalon, 2003 Toyota Avalon, and 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

Coat NEW "O" ring with grease and install hub. To complete installation, reverse removal procedure. Tighten all nuts and bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals