LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Suspension Rear) >> Removal & Installation >> Suspension Arms >> Installation

Suspension Arms: Installation

WARNING: This page is about a different car, the 2004 Toyota Avalon, 2003 Toyota Avalon, and 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse removal procedure. Be sure to install components in their original locations. Suspension arms are marked with paint. Install suspension arms with paint marks facing rearward.
  2. Install all nuts and bolts, but DO NOT tighten. Install wheels. Lower vehicle. Bounce vehicle several times to stabilize suspension. Tighten all nuts and bolts to specification, with vehicle weight on suspension. See TORQUE SPECIFICATIONS . Check rear wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES  under ADJUSTMENTS & INSPECTION.
scientia non olet · About LEMON Manuals