LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Suspension Rear) >> Removal & Installation >> Shock Absorber Assembly >> Installation

Shock Absorber Assembly: Installation

WARNING: This page is about a different car, the 2004 Toyota Avalon, 2003 Toyota Avalon, and 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS . Check rear wheel alignment. See WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES  under ADJUSTMENTS & INSPECTION.

scientia non olet · About LEMON Manuals