Axle Hub & Carrier: Installation

WARNING: This page is about a different car, the 2004 Toyota Avalon, 2003 Toyota Avalon, and 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Bounce vehicle several times to stabilize suspension. Tighten axle carrier-to-shock absorber assembly and suspension arm bolts to specification with vehicle at normal operating height.

To install, reverse removal procedure. Coat NEW "O" ring with grease and install hub. Tighten all fasteners to specification. See TORQUE SPECIFICATIONS . Bleed brake system. Check rear wheel alignment.