LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2001 >> Sienna CE >> Repair and Diagnosis >> External Pages >> Different car >> Section 252 (Suspension Rear) >> Adjustments & Inspection >> Wheel Bearing Adjustment

Wheel Bearing Adjustment

WARNING: This page is about a different car, the 2004 Toyota Avalon, 2003 Toyota Avalon, and 2002 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

Hubs must be replaced if axle end play or runout are not within specification. No adjustment is available. See WHEEL BEARINGS (HUBS)  under REMOVAL & INSTALLATION